Overview

In this example, we'll explain how to setup a Zap using Zapier and enter the Webhook into Lead Liaison. When the Webhook is called and the packet of information is sent to Zapier, Zapier will trigger the email using the information provided. 

Directions

• Go to https://zapier.com/
• Create an account.
• Make a Zap.

• Select "Web Hook" as the action 'When this happens'

• Set the Trigger Event as Catch Hook

• Press continue to get the Webhook URL.

Take this url and go to http://onlinecurl.com/ to setup the Webhook. With this step you're using simulating the Webhook call.
Put the Webhook URL in the first textbox as shown below:

Add the headers of the email by doing the following:

• Click on Add Option button and Select "–request(_X)" and set its value to "POST". 
• Click again on Add Option and this time choose --data(-d) and set its value to to=your_to_mail@example.com&from=your_from_mail@example.com&message=your_message&subject=your_subject

• Then click on the Curl Button. Now you have simulated the Webhook call. Zapier should show the detected the fields required for setup. 

• Now lets go back to  Zapier to continue the setup.
• Click continue which will take you to the next step which is configuring the Do That part of the Zap. Select Email by Zapier as the action.

• In the "To" field, click on the Insert fields button. A list of all detected fields are shown. 
• Choose the "to" field.

• Repeat this step for the subject and the body.

• Continue the steps until you reach the Turn on the Zap button. Click the button once you see it. 

• Now this Webhook can be used to send emails by passing the field values to it in the POST request.
• To setup this Webhook in lead liaison:
  
  1. Create a new Webhook. 
  2. Enter the Webhook Name and Description.
  3. Enter the Webhook URL: https://zapier.com/hooks/catch/n/r6u79/ (this was for our example, you'll have your own URL).
  4. Select POST as a Request Type.
  5. In the Template area, put the POST data which will be passed to the Webhook when it's called. "to=%%Email%%&message=your_message&subject=your_subject"
  6. Select "FORM/URL" as an Encoding Request Type.
  7. Click save.